Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil
Dayton Audio UM15-22 15" Ultimax DVC Subwoofer
Experience the Apex of Subwoofer Design
The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.
Key Specs:
- Nominal Diameter: 15"
- Power Handling (RMS): 800W
- Power Handling (MAX): 1,600W
- Impedance: 4Ω
- Frequency Response: 20 - 500 Hz
- Sensitivity: 89.1 dB 2.83V/1m
- Voice Coil Diameter: 2.5"
- Maximum Linear Excursion: 19mm
Download SpecsView Full Specs
We've Got Your Back
We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Learn More
Built To Move Some Air
To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.
Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.
Industry Leading Motor Strength
A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.
Unmatched Versatility
Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.
Feel Maximum Power On The Road
The Ultimax UM15-22 15" Subwoofer delivers more than enough power to rock the road ways. The sub is a perfect pick to add massive low end to your mobile audio speaker build. If you are looking for fast, articulate bass that really fills your car, look no further than the UM15-22.
Build Your Own Personal Cinema
Build by Nikolai L.
Not only is the UM15-22 great for car audio, it fits perfectly at home in your theater or listening room. The detailed response and low end strength lets you feel the rumble in your movies and gives you a concert-like music listening experience.
Cabinet Recommendations:
- Sealed: 3.8 cubic ft. (net internal, not including driver volume) with 3 lbs. of Acousta-Stuf polyfill produces an f3 of 34 Hz with a 0.83 Qtc alignment
- Vented: 4.5 cubic ft. (net internal, not including driver or port volume) produces an f3 of 24 Hz. Larger cabinets and lower tuning frequencies are possible.
Build by Aaron W.
Shop the Whole Ultimax Series
UM18-22 18"
Nominal Diameter: 18"
Frequency Response: 19-500Hz
Shop 18"
UM12-22 12"
Nominal Diameter: 12"
Frequency Response: 20-1,000Hz
Shop 12"
UM10-22 10"
Nominal Diameter: 10"
Frequency Response: 25-1,000Hz
Shop 10"
UM8-22 8"
Nominal Diameter: 8"
Frequency Response: 30-800Hz
Shop 8"
Shop All Ultimax Drivers and Kits
Learn More
Request Quote
The Dayton Audio UM15-22 Is Used In The Following Kits
Dayton Audio 15" Ultimax Subwoofer and Cabinet Bundle
Build one of the most powerful subwoofers you'll ever experience using this precision-cut, CNC-machined subwoofer cabinet and the Dayton Audio UM15-22 15" subwoofer. Save over $30 off the original retail price when you order this bundle
Build Your Own 15" Subwoofer
Additional Resources
We pride ourselves on being an authority in the speaker building and DIY community. With over 60 years of combined engineering experience, our team of engineers is here to help with your build. Below are some useful tools to get you started.
Learn More At The Resource Center
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | UM15-22 |
| Part Number | 295-514 |
| UPC | 844632099267 |
| Unit of Measure | Each |
| Weight | 35.3 |
Product Specifications | |
|---|---|
| Nominal Diameter | 15" |
| Bolt Circle Diameter | 14.76 |
| Power Handling (RMS) | 800Watts |
| Power Handling (MAX) | 1600Watts |
| Impedance | 4Ω |
| Frequency Response | 20 to 500Hz |
| Sensitivity | 89.1dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 28.4Hz |
| DC Resistance (Re) | 3.7Ω |
| Voice Coil Inductance (Le) | 0.8mH |
| Mechanical Q (Qms) | 2.8 |
| Electromagnetic Q (Qes) | 0.95 |
| Total Q (Qts) | 0.71 |
| Compliance Equivalent Volume (Vas) | 3.6ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.11mm/N |
| BL Product (BL) | 14.1T·m |
| Diaphragm Mass Inc. Airload (Mms) | 287g |
| Maximum Linear Excursion (Xmax) | 19mm |
| Surface Area of Cone (Sd) | 814.6cm² |
Materials of Construction | |
|---|---|
| Cone Material | Nomex / Glass Fiber |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 15.25" |
| Baffle Cutout Diameter | 13.8" |
| Depth | 7.875" |
| # Mounting Holes | 8 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 3.8ft³ |
| Sealed F3 | 34Hz |
| Vented Volume | 4.5ft³ |
| Vented F3 | 24Hz |
